Need a stock carb for a Cag

[J_boy]

just need a stock cag carb, dosent even need to be complete, just cheap. I have paypal as well.

- thanks

[Bighomedog11]

I have one!
How much are you looking to spend?
And when you say doesn't have to be complete what can be missing?

[J_boy]

um i guess the float assembly could be missing, also the needle and c-clip. thats about it. how about 14 shipped, and u ship priority mail.

[Bighomedog11]

Oh alright..
Let me see what i got in my basement and i will get a picture for you..

Could possibly do 14 shipped but i need to get your zip so i can see how much shipping will be..

Edit::

Does it have to be shipped out priority mail because there might be something cheaper.

[sr20hardbody]

uh uhh

sorry man but you'll need to use the entire carb i have about 4 stock carbs and they're not compatible with one another they all have slightly different sized bowls etc..

just like you cant use 2 case halves from 2 different motors they wont line up at all!

if you cant find one complete let me know i got spares and i could careless about them

by the way why you wanna stock carb with shitty ass plastic manifold

[J_boy]

well i have a drill press now, and i have practiced on some older stock carbs, and im getting pretty good at porting it 14mm all the way through, and have it open up at 16mm. Also i have a aluminum manifold since it came with the ADA cage. Also i still have a triple tapered needle from badazz toys when they were around. Im looking for a little bit more mid range and low end.


You can ship it in a flat rate box with priority mail, its 5 bucs and weight dosent matter. Im in a hurry to get the carb so thats why i need it mailed quicker. Besides their going brande new on ebay for 17 shipped.

[sr20hardbody]

k sounds good but just to let you know i doubt you'll gain any low-mid going to a stock carb cuz no matter what you'll always need to fully crack the throttle to get going just doing that alone makes it draw directly from the main jet and lowering the needle to close the main jet off to help the low end has ill effects like a high idle and extremely lean while cruising in powerband if the throttle isnt opened all the way.

by the way the carbs i got are taper ported inlet and outlet they still need the middle opened up so you'll need to open the manifold to match. let me know if thats what you want

[Bighomedog11]

Alright, I will go in my basement now and put together a carb and take some pictures for you.

[Bighomedog11]

Well i looked in my basement and i had 2 carbs but i already a temp to port them and i forgot all about that sense i have not messed with my pocket bike in awhile.

Soo J_boy sorry i dont have one..

[sr20hardbody]

yah i just checked mine too and i guess it'll be very difficult to port straight through with these tapered inlet and outlets. (19mm inlet- 16mm outlet)

its up to you J boy let me know i'll send ya what i got but at the same time i dont wanna waste your time if its not gonna work and you need it now nah mean?